- Model NO.: SAT IF
- Wiring Devices: ODF
- Condition: New
- Optical Connector: FC/APC, Sc/APC Optional
- Power Source: VAC86~265
- Trademark: CATVSCOPE
- Origin: Hangzhou, Zhejiang
- Type: Optic Transmitter
- Certification: CE
- Wavelength: 1310, 1528~1565
- Optic Modulate Method: Directly Modulation
- Size: 483X280X44mm
- Specification: CE certificated
- HS Code: 8517622990
CATV & SAT IF Optical Transmitter
This series of 950~2600MHz Satellite and CATV optical transmitters work at bandwidth of both 40~860MHz and 950~2600MHz.being able to work independently at bandwidth of 950~2600MHz, ETS-12600 can transmit CATV signal and the whole L-Band satellite signal(SAT-IF)received by LNB into optical signal, thus achieving transparent transmission of high quality in long distance through fiber.ETS-12600 series is a combination of high technology of CATV and satellite L-Band optical fiber link products, which provides the lowest cost solution in the market for the network providers.The transmitter is of 1U height which can be easily installed at 19" rack, it adopts low noise, narrow bandwidth and continuous wave DFB lasers with thermoelectric cooler from JDSU, Fujitsu or MITSUBISHI. Adopting original high quality critical components and system optimization control technology and SMNP technology designed by our own, the technical parameter of the whole machine completely meet the standard of other like products imported from Europe and U.S.A, providing remarkable photo, digital and compressed digital signals in long-distance transmission for CATV and satellite communication.
1. High quality: original system optimization control technology and RF pre-distortion technology ensure that the system can acquire the maximum CTB, CSO, and SBS targets in the case of excellent performance CNR .
2. Flexibility: it can independently transmit 1~2 ways of satellite signals. An extra way of CATV signal is optional.
3. Reliability: The 19 "1U standard rack, built-in high-performance dual switching power supply, it can work in the backup at 85 265Vac City Network Voltage, MS-level automatic switching; chassis cooling automatic temperature control.
4. Intuitive: The machine is equipped with microprocessor monitors the working state of the laser, the panel LCD window displays the operating parameters.
5. Network type: Select All-piece status monitoring transponder guarantee to meet the national standard and be compatible with the SCTE HMS standard, it enable network management monitoring capabilities.
6. Hot plug-in type:Aluminum structured plug switching power supply allows for heat dissipation and replacement. Dual power supply both hot and cold backup.
|1||Laser Type||DFB||See in specification|
|3||Side Mode Suppression Ratio||dB||≥45||SMSR|
|4||Noise Equivalent Intensity||dB/Hz||≤-145||RIN (20~2700MHz)|
|5||Optical Modulation||Direct Modulated|
|6||Optical Output Power||dBm|
|8||Optical Fiber Connector||FC/APC,SC/APC|
|4||RF Input Level||dBuV||77~83||AGC|
|7||RF Input Impedance||Ω||75|
|8||RF Input Return Loss||dB||>16||GB/T11381.1 184.108.40.206.5|
|2||IF Input Level||dBM||-40~-20||Total input power|
|4||IMD||dB||-40dBc||Total input power≤-20 dBm|
|6||Input Return Loss||dB||>12|
|16||Power consumption||W||≤50||Single power working|
|17||Working temperature||ºC||0~50||Chassis temperature control automatic|
|19||Operation relative humidity||%||20%~85%|
|21||Network type||RJ45||Support Web and SNMP|